We’re reader-supported. When you buy through our links, we may earn an affiliate commission. Learn more.

Every Household Needs Combination Pliers for Safety – Do you have it?

Pliers are among the most useful and versatile hand tools in your toolbox. They are mostly used for holding and gripping objects and for bending, twisting, and cutting wires. Looking similar to a pair of scissors, the two handles intersect at a pivot point.

Combination pliers are specially designed for all wire cutting needs. Tradesmen and DIY enthusiasts use the tool for gripping, compressing, bending, twisting, extracting, and cutting wires of all types. They also allow a much tighter gripping force.

The combination pliers see quite a few variations in its jaw designs. Some of the pliers have serrated jaws, which is good for gripping objects. Sometimes, pliers come with a rounded cut-out in the jaws. This is useful for holding rounded materials and is known as the pipe grip. Some of these tools also come with insulated handles which can be used to work with electrical wires or communication cables. These are often called as linesman’s pliers.

The tool serves a variety of jobs, making it an absolute necessity in your household tool kit. You can use it in different applications.

Gripping

Pliers are designed with gripping jaws. The edges are serrated which offers more friction, resulting in a stronger grip than just using your hands. What objects the jaws can grip and where they can reach is determined by the design and size of the jaws. These pliers come in various sizes with different jaw shapes.

Gripping flat or round stock

Combination pliers have versatile jaws. They have a flat side that easily holds flat stock. Some come with a cut-out section that’s suitable for holding rounded stock. This means small tubes and pipes can behold without fear of crushing them.

Compressing

The gripping jaws of these pliers are very useful for compressing materials. For example, they can be used to tighten a ferrule or close chain links.

Bending, twisting or straightening

When combination pliers hold material firmly in its gripping jaws, there are multiple ways in which the material can be manipulated. You can use another pair of pliers, a hammer, a clamp, or other tools to shape the object. Commonly, workers used this method for bending, twisting, or straightening of wires.

Pulling

Pliers provide a firm grip when pulling any objects. This is often useful in extracting staples or thin nails from a hard surface. Depending on the tool’s added features, they can also be used to pull out larger nails.

Cutting

Combination pliers come with side cutters that are positioned near the pivot point; it is the position in the jaws where the most force is exerted. These are short blades and designed to cut cables and soft wires. They cannot make long cuts or flat materials. The materials that you can cut with these cutters will depend on the individual tool’s specifications.

Care and Maintenance

It can be safely said in conclusion that combination pliers are an essential tool in the household. Here are some safety tips to remember for using this tool.

  • Hold the pliers straight and cut the wires in right angles only. Do not bend the wires back and forth or cut it side to side.
  • Always wear goggles or safety glasses to shield your face. There is always a chance of potential damages from wire pieces and flying particles.
  • Always make sure the tool is in good condition before using it.
  • Check to ensure the cutting edges are sharp. Dull and worn down cutting edges demand more effort in cutting.
  • The toothed jaws should be clean and sharp. Greasy or worn down jaws can compromise safety and cause strain injuries.
  • While using the pliers, always pull. Do not push.
  • Do not use the pliers to cut hardened wire; unless it is specifically designed for the job.
  • Do not expose your tool to excessive heat.
  • Do not use pliers as an alternative for hammers.
  • Do not use a hammer on your pliers or plier handles.
  • Do not use pliers for removing nuts or bolts. A wrench would be more suitable.
  • Do not use your pliers for electrical work; unless it has insulation properties.

Cleaning and storage

Most pliers are made of stainless steel or high-quality steel alloys. Any exposure to moisture can cause the tool to rust. Thus, your combination pliers should be kept in a clean and dry space like a box or in a drawer. It is also advisable to regularly oil your tool at its pivot point on periodic intervals. This will keep them in a good operating condition, making the movement easier and also help to prevent rust.

From bending and compressing to twisting wires, combination pliers are one of the most important tools to have in your household kit. Follow these safety and maintenance tips, and you can make the best use of this multi-purpose tool.

Leave a Comment